Below are the steps for applying tint film to your windows/ glass:
- The film should be applied to the inside of the window / glass, and it must be cleaned first with isopropanol and allowed to dry.
- Ensure the film is cut oversize.
- Align the film at the top edge, the film is self-adhesive and supplied on a thin liner which should be removed before application.
- Using wet application method to saturate the glass, water around the edge of the panel may cause dirt ingress, therefore avoid excess water at the edges of the film.
- A felt squeegree should be used to avoid scratching, applying overlapping strokes from the top centre outwards in each direction, then repeat down the film.
- Run a squeegee down the film edge a 45º angle with a blade to trim off the excess.
Related product : 72 series colored transparent film